郑州天通机械小型压路机手扶式压路机信誉
Instructions on the use of the vibration device of a walking roller
Because of its small size and light weight, the hand type roller can not achieve good compaction effect on the road only by its own gravity. Next, let's take a look at some of the things that need to be noticed when using the vibration device of the hand roller.
The first is that the vibration device can not be opened when the hand roller is running at high speed rolling operation. The vibration device should not be opened on the hard ground. In the course of operation, once the shift clutch or the vibrating clutch is found to be skidding, the operation should be stopped immediately. When the loose material is compacted, it must be compacted 1~2 times with static pressure and then vibrate and compacted.
More than 2.5 meters of distance should be kept at the same time when the multi - hand roller is working at the same time. Long distance transfer needs vehicles to carry, do not travel long distances. In the direction of reversing, the hand roller should be stopped first and then the reversing handle is pushed to the other direction.
关于行走辊振动装置使用的说明
手推滚筒由于体积小、重量轻，只能依靠自身的重力才能达到良好的压实效果。接下来，让我们来看看在使用手动辊的振动装置时需要注意的一些事情。
一是高速运转时手辊运行时，振动装置不能打开。振动装置不应在坚硬的地面上打开。在操作过程中，一旦发现换档离合器或振动离合器打滑，应立即停止操作。松散材料压实时，先静压1～2次，然后振动压实。
多滚轮同时工作时，应保持2.5米以上的距离。长途运输需要运载车辆，不能长途行驶。在换向的方向上，应停止手轮，然后将换向手柄推到另一个方向。
手扶式压路机参数：
型号：TY-SF700
行走速度：0-6km/h 驱动方式：液压驱动
爬坡能力：30% 振动方式：电磁离合
驱动控制： 无极变速 激振力 ： 30KN
包装尺寸: 1850*860*1030mm 动力型号：常柴CF178F/本田GX270
功率： 4.0KW/9HP 钢轮尺寸：前700*530mm，后450*450mm
启动方式：一键电启动 重量 ：850KG
郑州天通机械设备有限公司，是国内的机械设备集研发、生产制造及销售于一体的生产厂家，其核心产品以：压路机、压实机、压实碾、振动夯、小型压路机、座驾式压路机、手扶式压路机、双钢轮压路机、双轮压路机、单钢轮压路机、单轮压路机、柴油压路机、汽油压路机、小型振动压路机、液压压路机、液压振动压路机、手扶单钢轮压路机、手扶双钢轮压路机、座驾式液压振动压路机、小型液压压路机、1吨压路机、1.5吨压路机、2吨压路机等多类型压路机